GohouBee 3D Printable PLA Parts (Free Download)

3D Print your own PLA parts with the color of your choice.  Sorry at this time the outer TPU part is not printable.  See GohouBee

Add this item for free for unlimited downloads of this STL File to 3D print the Different Faces and stripes.

Local Libraries with Makerspaces will typically allow free 3d Prints with the color of your choice.

Email me if you have any questions or issues at info@gaigene.com

SPECIAL 3D PRINT SLICER SETTINGS

Creality Hyper PLA (Snapmaker PLA SnapSpeed)

0.08 High Quality  (.4 Nozzle)

Quality

• Ironing all top surfaces

• Ironing flow 15% (set higher than default)

Speed

• ironing speed 20 mm/s (set slower than default)

• first layer 25mm/s (set slower than default)

• first layer infill 25 mm/s (set slower than default)

• number of slow layers 2

Other

• Brim Type Mouse Ears

• Brim width 3mm (less than 5mm default)

Support (recommended)

• enable support,

• On build plate only

• Tree Support->Tree support branch angle=60 (for gohoubee, hebee head),

• branch density=5,

• tree support branch diameter = 1mm,

• branch diameter angle=15%, 

• Tree Support->Tip diameter=.5

Alternatively, Pause the print at layer 42 (prior to printing the first layer over the magnet) and place the 3mmx6mm neodymium magnet so the layer will be clean for the stripe.  No need to pause if printing the face(s).

Masking tape on plate sometimes help with making sure things stick, but becomes a pain to remove.